With a large surface area, each DMM Peenut stopper in this set of sizes 1–5 is suitable for protecting fragile rock. The asymmetrical taper is designed to protect flared and irregular shaped cracks.
- Large surface areas spread forces in a fall across a greater area, increasing placement security in fragile rock
- Peenuts have the same asymmetrical taper as Alloy Offsets (not included), allowing them to protect flared and irregular shaped cracks more effectively than symmetrical nuts
- Asymmetrical taper gives stable placements in offset cracks: offset taper protects cracks where normal nuts would not sit properly, such as flared cracks and peg scars
- DMM recommends using these in combination with normal nuts to find security in almost any crack
- Micro protection lets you protect cracks which normal-sized pieces would not fit; having these wires on your rack gives you more options
- Passive protection works in wet and icy conditions: Passive protection works by jamming in constrictions to prevent falls; it is suitable for use in all conditions
- Unlike active protection such as cams, passive protection can be used in wet or icy cracks, where friction is reduced
- Certification for all sizes: EN 12270:2013
- Color-coded for easy size selection; colors are coordinated across passive and active protection, for quick selection of alternatives if your first choice doesn't fit
Imported.
Set includes 5 sizes. See below for individual Size / Strength / Weight / Width / Color:
View all DMM Nuts- #1 / 4 kN / 8 g / 6.5 & 11.5 mm / Red
- #2 / 5 kN / 9 g / 6.8 & 12.1 mm / Grey
- #3 / 5 kN / 10 g / 7.8 & 12.7 mm / Purple
- #4 / 8 kN / 16 g / 8.9 & 13.2 mm / Green
- #5 / 8 kN / 18 g / 9.2 & 13.9 mm / Silver
| Best Use | Rock Climbing |
|---|---|
| Strength | 4-8 kilonewtons |
| Length | Unavailable |
| Width | 6.5-13.9 millimeters |
| Weight | 61 grams |