With a large surface area, the DMM Peenut stopper is suitable for protecting fragile rock. The asymmetrical taper is designed to protect flared and irregular shaped cracks.
- Large surface areas spread forces in a fall across a greater area, increasing placement security in fragile rock
- Peenuts have the same asymmetrical taper as Alloy Offsets (not included), allowing them to protect flared and irregular shaped cracks more effectively than symmetrical nuts
- Asymmetrical taper gives stable placements in offset cracks: offset taper protects cracks where normal nuts would not sit properly, such as flared cracks and peg scars
- DMM recommends using these in combination with normal nuts to find security in almost any crack
- Micro protection lets you protect cracks which normal-sized pieces would not fit; having these wires on your rack gives you more options
- Passive protection works in wet and icy conditions: Passive protection works by jamming in constrictions to prevent falls; it is suitable for use in all conditions
- Unlike active protection such as cams, passive protection can be used in wet or icy cracks, where friction is reduced
- Certification for all sizes: EN 12270:2013
- Color-coded for easy size selection; colors are coordinated across passive and active protection, for quick selection of alternatives if your first choice doesn't fit
- Peenut #1: red
- Peenut #2: grey
- Peenut #3: purple
- Peenut #4: green
- Peenut #5: silver
Imported.
View all DMM Nuts| Best Use | Rock Climbing |
|---|---|
| Strength | 1: 4 kilonewtons 2: 5 kilonewtons 3: 5 kilonewtons 4: 8 kilonewtons 5: 8 kilonewtons |
| Length | Unavailable |
| Width | 1: 6.5 / 11.5 millimeters 2: 6.8 / 12.1 millimeters 3: 7.8 / 12.7 millimeters 4: 8.9 / 13.2 millimeters 5: 9.2 / 13.9 millimeters |
| Weight | 1: 8 grams 2: 9 grams 3: 10 grams 4: 16 grams 5: 18 grams |